中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 42125.10-2022 测量、控制和实验室用电气设备的安全要求 第10部分:绝缘电阻测量和介电强度试验设备的特殊要求(中英文版) Safety requirements for electrical equipment for measurement, control and laboratory use - Part 10: Particular requirements for insulation resistance measurement and dielectric strength test equipment |
|||
HB 8608-2021 飞机结构静强度试验载荷处理要求(中英文版) Load handling requirements for static strength tests of aircraft structures |
|||
HB 8630-2021 全尺寸飞机静强度/疲劳试验加载控制要求(中英文版) Full-scale aircraft static strength/fatigue test loading control requirements |
|||
GB 15083-2019 汽车座椅、座椅固定装置及头枕强度要求和试验方法(中英文版) Strength requirement and test method of automobile seats,their anchorages and any head restraints |
|||
GB 15083-2019 汽车座椅、座椅固定装置及头枕强度要求和试验方法(中英文版) Strength requirement and test method of automobile seats,their anchorages and any head restraints |
|||
GB/T 36148.2-2018 船舶与海上技术 海上环境保护 围油栏 第2部分:强度和性能要求(中英文版) Ships and marine technology—Marine environment protection—Oil booms—Part 2: Strength and performance requirements |
|||
GB/T 36509-2018 滑翔伞结构强度要求及测试方法(中英文版) Requirements and testing methods of structure strength for paraglider |
|||
GB/T 33628-2017 风力发电机组 高强螺纹连接副安装技术要求(中英文版) Wind turbine generator systems—Assembly requirements for high-strength-bolted joint |
|||
GB/T 33641.2-2017 农林拖拉机和机械 安全带 第2部分:固定装置强度要求(中英文版) Tractors and machinery for agriculture and forestry—Seat belts—Part 2:Anchorage strength requirements |
|||
GB/T 35384-2017 大型游艇 风雨密门 强度和风雨密要求(中英文版) Large yachts—Weathertight doors—Strength and weathertightness requirements |
|||
GB/T 35354-2017 船舶和海上技术 大型游艇 甲板起重机和登船梯强度要求(中英文版) Ships and marine technology—Large yachts—Deck crane and access gangways strength requirements |
|||
GB/T 1408.3-2016 绝缘材料 电气强度试验方法 第3部分:1.2/50μs冲击试验补充要求(中英文版) Insulating materials—Test methods for electric strength—Part 3: Additional requirements for 1.2/50 μs impulse tests |
|||
GB/T 1408.2-2016 绝缘材料 电气强度试验方法 第2部分:对应用直流电压试验的附加要求(中英文版) Insulating materials—Test methods for electric strength—Part 2: Additional requirements for tests using direct voltage |
|||
GB/T 17186.1-2015 管法兰连接计算方法 第1部分:基于强度和刚度的计算方法(中英文版) Calculation methods for the pipe flange joints—Part 1: Calculation method satisfies both strength and rigidity requirements |
|||
GB/T 32076.1-2015 预载荷高强度栓接结构连接副 第1部分:通用要求(中英文版) High-strength structural bolting assemblies for preloading—Part 1: General requirements |
|||
GB/T 31494-2015 数字电视场强测试仪技术要求和测量方法(中英文版) Technical requirements and test methods for field strength meter of digital television |
|||
GB/T 19126-2015 三轮汽车和低速货车 座椅系统 强度要求及试验方法(中英文版) Low-speed vehicle—Seat systems—Strength requirements and test methods |
|||
QC/T 946-2013 汽车安全带织带性能要求和试验方法(中英文版) Strength requirement and test of automobile safe belt strap |
|||
GB 17578-2013 客车上部结构强度要求及试验方法(中英文版) Requirements and test methods of strength for the superstructure of bus |
|||
QC/T 232-2009 摩托车和轻便摩托车制动手柄强度要求及试验方法(中英文版) Strength requirements and test methods for brake handle of motorcycles and mopeds |
找到:30條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 |